| SIP Energy Systems |
| SIP Energy Systems LLC 868 S. Brunswick Marshall, MO 65340 |
| Saving Energy Today.... To Build a Better Tomorrow |
The Crete-Heat TM Insulated Floor Panel System, is an
easily assembled modular board insulation, vapor barrier
and radiant tube holding grid. It allows for simplified
installation of hydronic radiant floor heating systems in
basements, garages, main floor slab on grade and above
grade installations where concrete or gypcrete is normally
used.
The Crete-Heat TM Insulated Floor Panel System is 2 7/8"
overall in thickness, with 2" of solid EPS foam providing an
R-9. Our retrofit or above grade panel provides 2 1/8"
overall in thickness, with 1" of solid EPS foam providing an
R-6 with a 23db sound reduction knob on the lower surface.
Each interlocking panel covers up to 8 square feet with
fasteners for 1/2", 5/8", 3/4" and 7/8" radiant tubing. A
10-mil polystyrene film provides the vapor barrier.
easily assembled modular board insulation, vapor barrier
and radiant tube holding grid. It allows for simplified
installation of hydronic radiant floor heating systems in
basements, garages, main floor slab on grade and above
grade installations where concrete or gypcrete is normally
used.
The Crete-Heat TM Insulated Floor Panel System is 2 7/8"
overall in thickness, with 2" of solid EPS foam providing an
R-9. Our retrofit or above grade panel provides 2 1/8"
overall in thickness, with 1" of solid EPS foam providing an
R-6 with a 23db sound reduction knob on the lower surface.
Each interlocking panel covers up to 8 square feet with
fasteners for 1/2", 5/8", 3/4" and 7/8" radiant tubing. A
10-mil polystyrene film provides the vapor barrier.
Installation
Make sure sub grade material is + or - 1/4" of level to start. To lay boards correctly,
start at the far left-hand corner and work systematically across the floor as numbered
on the sample. The only cut off is for the partition wall. The Crete-Heat TM Panel
Modular Board System forms a continuous thermal insulation and vapor barrier with
tube fasteners all in one simplified step.
Make sure sub grade material is + or - 1/4" of level to start. To lay boards correctly,
start at the far left-hand corner and work systematically across the floor as numbered
on the sample. The only cut off is for the partition wall. The Crete-Heat TM Panel
Modular Board System forms a continuous thermal insulation and vapor barrier with
tube fasteners all in one simplified step.
|
Specification
3" Grid Pattern for 1/2" and 5/8" Tubing
3" Grid Pattern for 1/2" and 5/8" Tubing
Shipping
Green Bags 2" (64 square feet per bag)
Black Bags 1" (96 square feet per bag)
Shipped 10 bags per pallet
22 Pallets per Truck
Green Bags 2" (64 square feet per bag)
Black Bags 1" (96 square feet per bag)
Shipped 10 bags per pallet
22 Pallets per Truck
- Cut's radiant system install time by as much as 2/3.
- Designed to hold tube securely in place with wider fasteners.
- 2 sizes available for both new construction and retrofitting existing buildings.
- UV protected packaging for outdoor storage.
 | |  | |  | |  | |  |
 | |  | |  | |  | |  | |  |
| John Gorrell 660-229-0058 |